-
SPLINE
Consisting of separate trunking units, LED battens
and track lighting units.
Back to SPLINE page
-
Trunking Units
Art no.: 309-201-001-xx* Trunking Unit 1500mm Poles: 7 Weight: 1.8 kg
Art no.: 309-201-002-xx* Trunking Unit 3000mm Poles: 7 Weight: 3.7 kg
Art no.: 309-201-004-xx* Trunking Unit 860mm Poles: 7 Weight: 1.1 kg5, 9 & 11 pole versions of trunking units available by request.
Trunking units are available in lengths of 860 mm,
1500 mm and 3000 mm. Units are easily assembled
without tools.
Back to SPLINE page -
Trunking Joint
Art no.: 309-303-001
*Add color code to Art no
– 10 White – 30 Grey
– 20 Black – 00 GalvanizedTrunking joint and End cap are used as mounting
points for Spline, this means that there is a
mounting point at the end of each Trunking unit.
These parts also include a locking system that holds
the Trunking unit together.
Back to SPLINE page -
End Cap
Trunking joint and End cap are used as mounting
points for Spline, this means that there is a
mounting point at the end of each Trunking unit.
These parts also include a locking system that holds
the Trunking unit together.
Back to SPLINE page
-
LED Batten
LED battens are designed around a lightweight frame of extruded
aluminum with driver and connection system on the top side.
On the bottom side there are top performing mid-power LED
chips mounted on MCPCB’s for optimal thermal management.
High purity PC lenses to ensure colour stability over time
and minimum optical loss.LED battens are available in three different types:
• Pro and Pro X version which offers high efficiency
and high lumen output options.
• The Standard, offers lower initial investment cost.
Optionally the LED battens can be fitted with DALI
dimmable drivers to enable lighting controls.
Back to SPLINE page -
Emergency Batten
Emergency batten
Emergency batten is a LED batten with integrated
emergency light control and battery. In normal condition
it works like an ordinary LED batten but when
power supply fails it will immediately switch over to
battery supply, there is versions for 1h and 3h emergency
light. A button on the outside of the profile is
used for testing and there is also a status indicator.
Emergency batten DALI version can be controlled
and monitored with DALI interface. Spline system
with emergency light need to be built with Trunking
units with at least 9 wires.
Back to SPLINE page
-
Suspension Kit
Art No.: 047-286 Suspension kit 6000 mm
The Spline system can be mounted to a ceiling or to
a cable channel without any additional parts.
Wire kit are available to suspend the Spline system.
For false inner ceiling, a clip is used to secure the
system.
Back to SPLINE page -
Ceiling Clip
Art No.: 309-284-001
The Spline system can be mounted to a ceiling or to
a cable channel without any additional parts.
Wire kit are available to suspend the Spline system.
For false inner ceiling, a clip is used to secure the
system.
Back to SPLINE page
